Grooving and Turning

Ultramini, Minicut, System DED, System ZSR, System ZTP...

Milling

Mikromill, Minimill three cutting edges, Minimill six cutting edges, Circular interpolation, Disk milling cutter ...

Broaching

Broaching up to Ø 6 mm, Broaching up to Ø 10 mm, Broaching up to Ø 17 mm ...

Boring

Improve now your precision, quality and efficiency with the smallest finishing bores.

Turning - System DED


Grooving and turning with three-edged indexable cutting inserts. A large selection of standard cutting-geometries and toolholders.

Type R/L 207

Groove width 0,5 up to 6,3 mm; groove depth up to 6 mm

no-img
Type R/L 0.78x

Groove width 0,5 up to 6,3 mm; groove depth up to 8 mm

no-img
Type R/L 0.738

Groove width 0,5 up to 6,3 mm; groove depth up to 6 mm

no-img
Type R/L 0.618

45°; Groove width 1,9 up to 6,3 mm

no-img
Boring bar type R/L 0.660

Groove width 0,5 bis 6,3 mm; groove depth up to 5 mm

no-img
Type R/L 0.736

Groove width 0,5 bis 1,2 mm; groove depth up to 8 mm

no-img
Type R/L 208 (for screwed inserts)

depth of groove tmax=5.5 mm; holding capacity S=5.5 mm

Type R.619 (for screwed inserts)

45°; holding capacity S=3.3 mm

for circlip DIN 471/472

for interrupted cuts

no-img
for circlip DIN 471/472

Groove width: 0,5 up to 1,0 mm type DED ... 13

no-img
for circlip DIN 471/472

with chamfers

no-img
Grooving inserts for

corner reliefs full radius

no-img no-img
full radius

recommended only for grooving

no-img
for grooving and

turning depth of groove up to 3,5 mm

no-img no-img
for corner reliefs

similar to DIN 509 Form F

no-img no-img
face grooving

Dmin=20 mm; depth of groove up to 3,5mm; width of groove 1,5-5,0mm

no-img
face grooving mounted under 45°

Dmin=8 mm; depth of groove up to 2 mm; width of groove 1,5-2,4mm

SET-DED 1

toolholder + 10 inserts