Grooving and Turning

Ultramini, Minicut, System DED, System ZSR, System ZTP...

Milling

Mikromill, Minimill three cutting edges, Minimill six cutting edges, Circular interpolation, Disk milling cutter ...

Broaching

Broaching up to Ø 6 mm, Broaching up to Ø 10 mm, Broaching up to Ø 17 mm ...

Boring

Improve now your precision, quality and efficiency with the smallest finishing bores.

ULTRAMINI


The Dümmel Ultramini tool-line is a must for turning smallest bores. The inside bore machining of small diameters has always been difficult and it is not easy to obtain the ideal tool. The Ultramini tool-line covers more than 1.000 different standard inserts which could be clamped in only two toolholders. Of course the complete Ultramini program is available on stock.

Type 645/676/687/681

starting at Ø 12 mm

no-img
Type 645.G/676.G

improved version with modified clamping screw starting Ø 12 mm

no-img
Type K645/K676 perfect for type 520 and high pressure applications

with central cooling bore starting Ø 12 mm

no-img
Type 645.PT/676.PT/687.PT

Premiumline with improved cooling starting Ø 12 mm

Type 640/650/660/670/680

starting Ø 12 mm for inserts Dmin Ø 6.0/7.0/8.0 mm

no-img
Type UMST

toolholder with high-pressure connection for Swiss type machines

Type UM600H

high-performance toolholder with coolant connection starting Ø 12 mm

Type UM

starting 10 mm for inserts Dmin Ø 0.2 - 7.0 mm

no-img
Type UHCM

starting 12 mm for inserts Dmin Ø 0.2 - 7.0

no-img
Type UM.18/UM.28

starting 10 mm für Schneideinsatz Dmin Ø 0.2 - 7.0

no-img
Type 050

profiling and copying bore Ø from 0.2 mm

no-img
Type 050.20

profiling and copying with frontside angle 20° bore Ø from 2.0 mm

no-img
Type 053

profiling and copying with corner radius 0.03 bore Ø from 2.8 mm

no-img
Type 055

profiling and copying with corner radius 0.05 bore Ø from 2.0 mm

no-img
Type 050 B

boring/profiling copying with internal cooling channel bore Ø from 6.0 mm

no-img
Type 050 C

profiling and copying with chipbreaker for better chipcontrol bore Ø from 4.0 mm

no-img
Type 050 CB

profiling and copying with through coolant over middle bore and chip breaker bore Ø from 6.0 mm

no-img
Type 050 CBN

profiling and copying for hard machining bore Ø from 2.8 mm

no-img
Type 047

profiling and copying with 47° geometry bore Ø from 4.0 mm

no-img
Type 090

profiling and copying with geometry 90°bore Ø from 2.8 mm

no-img
Type 080

backboring bore Ø from 3.0 mm

no-img
Type 002

grooving bore Ø from 2.0 mm depth of groove up to 0.4 mm

no-img
Type 003

grooving bore Ø from 3.0 mm depth of groove up to 0.6 mm

no-img
Type 004

grooving bore Ø from 4.0 mm depth of groove up to 0.8 mm

no-img
Type 004 M

grooving with corner radius bore Ø from 4.0 mm depth of groove up to 0.8 mm

no-img
Type 005

grooving bore Ø from 5.0 mm depth of groove up to 1.0 mm

no-img
Type 005 M

grooving bore Ø from 5.0 mm depth of groove up to 1.0 mm

no-img
Type 006

grooving bore Ø from 6.0 mm depth of groove up to 1.8 mm

no-img
Typ 006 M

grooving with corner radius bore Ø from 6.0 mm depth of groove up to 1.8 mm

no-img
Typ 007

grooving bore Ø from 6.8 mm depth of groove up to 2.5 mm

no-img
Type 007 M

grooving with corner radius bore Ø from 6.8 mm depth of groove up to 2.5 mm

no-img
Type 008 M

grooving with corner radius bore Ø from 7.8 mm depth of groove up to 3.0 mm

no-img
Type full radius

grooving and copying bore Ø from 4.0 mm full radius 0.5 - 1.0 mm

no-img
Type 060

profiling and chamfering bore Ø from 5.0 mm

no-img
Type 070

pregrooving and chamfering bore Ø from 4.0 mm

no-img
Type metric ISO-Standard thread

partial profile 60° bore Ø from 2.4 mm pitch P = 0.5 - 1.5 mm

no-img
Type metric ISO-fine thread

partial profile 60° bore Ø from 3.2 mm pitch P = 0.5-1.5 mm

no-img
Type metric ISO-Standard thread

full profile 60° bore Ø from 4.8 mm pitch P = 0.8-1.5 mm

no-img
Type metric ISO-fine thread

full profile 60° bore Ø from 4.0 mm pitch P = 0.5-1.0 mm

no-img
Type metric ISO-whitworth thread

partial profile 55° bore Ø from 4.8 mm

no-img
Type trapezoidal thread

partial profile 30° bore Ø from 7.0 mm pitch P=2.0-3.0

no-img
Type NPT-thread

partial profile bore Ø from 6.0 mm

no-img
Type Whitworth-thread

full profile bore Ø from 6.0 mm

no-img
Type 510 M

face grooving with corner radius from outer groove Ø 5.0 mm

Type 610

face grooving from outer groove Ø 6.0 mm

no-img
Type 610 M

face grooving with corner radius from outer groove Ø 6.0 mm

no-img
Type 610

face grooving full radius from outer groove Ø 6.0 mm

no-img
Type 620

face grooving in pivots from outer groove Ø 6.0 mm

no-img
Typ 620 M

face grooving in pivots with corner radius from outer groove Ø 6.0 mm

no-img
Type 010

face grooving from outer groove Ø 6.0 mm

no-img
Type 010 M

face grooving with corner radius from outer groove Ø 6.0 mm

no-img
Type 010

face grooving full radius from outer groove Ø 8.0 mm

no-img
Type 015

face grooving from outer groove Ø 8.0 mm

no-img
Type 015 M

face grooving with corner radius from outer groove Ø 8.0 mm

no-img
Type 016/020

face grooving with double internal cooling channel from outer groove Ø 16.0 mm

no-img
Type 520

chamfering internal bore Ø from 1.0 mm

no-img
Set 1

boring, profiling, copying and grooving right

no-img
Set 2

grooving right

no-img
Set 3

boring, profiling and copying right

no-img
Set 6

right face grooving (internal) bore Ø from 8.0 mm

no-img

Hardline


Ultramini HARDLINE - premium tool for machining

 

  • hard machining up to 66 HRC
  • optimized cutting edges
  • special carbide
  • hightech coating
  • brilliant cost effectivness
Type 050

hard machining up to 66 HRC

no-img

Mediline


For the Medline system the focus is on small part machining <=4mm. For this Dimension the System has an internal cooling bore inside the carbide shank which provides unique advantages regarding the cooling. Furthermore the cutting edge geometry and the carbide are optimized for this line. Together with the new high tech coating this new system guarantees an increase in tool life especially for difficult to machine materials.
The new Mediline System is available with a very small corner radius for every dimension.

Type M050

profilig and copying with modified profile

no-img

Xtraline


The Dümmel Xtraline is an extension of the current Ultramini System with a very solid geometry. It comes also with the internal cooling bore, special carbide and of course an optimized cutting edge and shank geometry.
The new Lines are fitting into the current Ultramini tool holders.
With a high variety of different radius Version of this insert, best surface qualities are guaranteed.

Type X050

profiling and copying with chipbreaker, extra solid construction

no-img